80 Operating Manual RX1330 M4
6.2 Installing HDD/SSD modules
6.2.1 Installing 2.5-inch HDD/SSD modules
6.2.1.1 Removing a 2.5-inch HDD/SSD dummy module
Figure 20: Removing a 2.5-inch HDD/SSD dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V CAUTION!
Keep the dummy module for future use.
Always replace dummy modules into unused HDD/SSD bays to comply
with applicable EMC regulations and satisfy cooling requirements.
To Next Page
Loading...
