Fujitsu PRIMERGY RX1330 M4

RX1330 M4 Operating Manual 75
Starting up
5.8 Notes on configuring controllers
I Ensure that the power saving functions are disabled in the Power menu
of the BIOS setup during operation.
I Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.
html
For Japan:
http://www.fmworld.net/cgi-bin/drviasearch/drviaindex.cgi
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloa
ds/
5.8.1 Notes on onboard SATA controllers
I The controller has its own configuration utility. For more information, see
the “Embedded MegaRAID Software User’s Guide” (on the Fujitsu
manuals server under x86 Servers - Expansion Cards - Storage
Adapters - LSI Configuration Software).
I In the BIOS the onboard SATA controller can be configured as RAID
(default) or non-RAID.
5.8.2 Notes on SAS/SATA RAID controllers
I A separate utility is available to the controller for MegaRAID
configuration. For more information, see the "SAS Software User’s
Guide" (on the Fujitsu manuals server under x86 Servers - Expansion
Cards - Storage Adapters - LSI Configuration Software).
More information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the Fujitsu manuals
server under x86 Servers - Expansion Cards - Storage Adapters - LSI
SAS / SCSI RAID Controllers).