Fujitsu PRIMERGY RX1330 M4

74 Operating Manual RX1330 M4
Starting up
5.7 Configuring the server without ServerView
Installation Manager
5.7.1 Configuring the server and installing the operating
system
5.7.1.1 Configuring the onboard SAS/SATA controller
Ê If applicable, configure the onboard SATA controller, see "Notes on
configuring controllers" on page 75.
Ê If applicable, configure the SAS/SATA RAID controller with MegaRAID
functionality, see "Notes on configuring controllers" on page 75.
5.7.1.2 Installing the operating system
Ê Insert the DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.