Fujitsu PRIMERGY RX1330 M4 User Manual

72 Operating Manual RX1330 M4
Starting up
5.6 Configuring the server with ServerView
Installation Manager
I Ensure that the power saving functions are disabled in the Power menu
of the BIOS setup during operation.
Advantages of the ServerView Installation Manager
– Wizard-assisted configuration of your server hardware and disk arrays.
– Wizard-assisted installation of all leading server operating systems.
– Wizard-assisted creation of configuration files for unattended installation of
several PRIMERGY servers with identical hardware configurations.
– Installation of drivers and additional software.
I The software that can be installed depends on the hardware
configuration of your server. This configuration is detected automatically.
5.6.1 Configuring the server and installing the operating
system
I When using the ServerView Installation Manager you can configure the
onboard controller either before or during installation.
I Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.
html
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloa
ds/

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller