EasyManuals Logo

Fujitsu PRIMERGY RX1330 M4 User Manual

Fujitsu PRIMERGY RX1330 M4
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32 Operating Manual RX1330 M4
Product description
2 [CSS]
CSS
indicator
off
No critical event detected (CSS
component).
orange
on
Prefailure event detected (CSS
component).
For HDDs/SSDs, see also
"HDD/SSD prefailure detection" on
page 34.
flashing
orange
CSS component failure detected.
3
Global
Error
indicator,
see also
"iRMC-
related
status
signals" on
page 34
off
No critical event detected (non CSS
component).
orange
on
Prefailure event detected (non CSS
component).
flashing
orange
Non CSS component failure
detected.
Possible causes:
System is out of the specified
temperature range
Defective sensor
CPU error
Error detected by server
management software
4
HDD/SSD
activity
indicator
flashing
green
Data access in progress.
5
Power-on
indicator
off The server is switched off.
green on
The server has been switched on
but Power Cycle Delay settings
delay it from turning on for a
specified time.
The server is switched on and
operating normally.
flashing
green
slowly
The BMC firmware is starting up after
the server has been connected to the
mains.
Pos. Label Indicator Status Description
!

Table of Contents

Other manuals for Fujitsu PRIMERGY RX1330 M4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX1330 M4 and is the answer not in the manual?

Fujitsu PRIMERGY RX1330 M4 Specifications

General IconGeneral
ChipsetIntel C246
ProcessorIntel Pentium, Intel Celeron
Memory TypeDDR4
MemoryUp to 64 GB
Memory Slots4 DIMM slots
Drive Bays4 x 3.5-inch or 8 x 2.5-inch
Network2x 1GbE onboard, optional additional NICs
Power Supply450W
Form Factor1U
RAID Controlleroptional SAS RAID controller

Related product manuals