Fujitsu PRIMERGY RX1330 M4 User Manual

RX1330 M4 Operating Manual 59
Starting up
Ê Configure the server and install the desired operating system and
applications. The following options are available:
Installation with ServerView Installation Manager
– Local configuration and installation, see section "Configuring the server
with ServerView Installation Manager" on page 72
– Remote installation, see section "Configuring the server with ServerView
Installation Manager" on page 72.
I For more information on installing the server (remote or local), see
the "ServerView Installation Manager" user guide at
http://manuals.ts.fujitsu.com under x86 Servers - Software -
ServerView Suite - Server Installation and Deployment.
Installation without ServerView Installation Manager
– Local configuration and installation, see section "Configuring the server
without ServerView Installation Manager" on page 74.

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller