52 Options Guide TX100 S2
Expansion cards and parallel interface
Ê Fasten the TPM with the special screw for the TPM (2).
Please use the TPM screwdriver insert bit to tighten the special screw.
I Do not fasten the screw too tightly (torque value of 0.6 Nm: for EMEA
market).
V CAUTION
The system board has to be removed in order to loosen the TMP screw.
Use a thin slotted screwdriver (e.g. watchmaker's screwdriver) to remove
the screw.
I You can find information on configuring the TPM in the "D2779 BIOS
Setup Utility for TX100 S2" manual.
To Next Page
Loading...
