EasyManua.ls Logo

Fujitsu PRIMERGY TX100 S2 - Performance Features

Fujitsu PRIMERGY TX100 S2
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX100 S2 Operating Manual 11
Preface
Further sources of information:
PRIMERGY Abbreviations and Glossary on the ServerView Suite DVD 2
Manual for the monitor
Documentation for the boards and drives
Operating system documentation
Information files in your operating system
1.3 Performance features
System board
The features of the system board are described in the technical manual for the
system board D2779 for the hardware and in the BIOS Setup manual for the
BIOS.
Slots for expansion cards
The server can be flexibly expanded via four slots:
two PCIe Gen2 x8
one PCIe Gen2 x4
one PCI (32 Bit / 33 MHz; 3.3 V)
PCIe Gen2 doubles the bandwidth of currently existing PCIe busses and allows
improved system performance.
Hard disk drives
Up to four SATA hard disk drives, each with a maximum height of 1 inch, are built
into the drive rack. There is a wire connection to the controller.
The SATA hard disk drives are controlled by the onboard SATA RAID controller.
The optional SAS controller has to be plugged into one of the I/O slots.

Other manuals for Fujitsu PRIMERGY TX100 S2

Related product manuals