EasyManuals Logo

Fujitsu PRIMERGY TX100 S2 User Manual

Fujitsu PRIMERGY TX100 S2
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
TX100 S2 Operating Manual 53
Installation and operation
5.3.3 Configuring the server and installing the operating
system without the ServerView Installation
Manager
Configuring the onboard SATA controller
Configure the controller as described in section "Configuring the onboard SATA
controller" on page 51.
Installing the operating system
Ê Insert the CD/DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.
5.4 Cleaning the server
V CAUTION!
Switch the server off and disconnect the power plugs from the properly
grounded power outlets.
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server and the monitor are clear.
Do not use any cleaning sprays (including flammable types). It may
cause a device failure or a fire.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.

Other manuals for Fujitsu PRIMERGY TX100 S2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX100 S2 and is the answer not in the manual?

Fujitsu PRIMERGY TX100 S2 Specifications

General IconGeneral
Tcase72.7 °C
Bus typeDMI
SteppingB1
FSB ParityNo
Processor codeSLBLJ
Processor cache8 MB
Processor cores4
Processor modelX3430
System bus rate2.5 GT/s
Processor seriesIntel Xeon 3400 Series
Processor socketLGA 1156 (Socket H)
Processor codenameLynnfield
Motherboard chipsetIntel® 3420
Processing Die size296 mm²
Processor frequency2.4 GHz
Processor cache typeSmart Cache
Processor lithography45 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor front side bus- MHz
Processor boost frequency2.8 GHz
Processor operating modes64-bit
ECC supported by processorYes
PCI Express configurations1x16, 2x8, 4x4
Supported instruction setsSSE4.2
Thermal Design Power (TDP)95 W
Number of processors installed1
CPU multiplier (bus/core ratio)18
Physical Address Extension (PAE)36 bit
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3-SDRAM
Number of Processing Die Transistors774 M
Memory channels supported by processorDual
Memory clock speeds supported by processor800, 1066, 1333 MHz
Memory bandwidth supported by processor (max)21 GB/s
Maximum internal memory supported by processor32 GB
HDD size3.5 \
HDD interfaceSerial ATA
Optical drive typeDVD-RW
Total storage capacity1000 GB
Maximum storage capacity4 TB
Number of HDDs installed2
Memory slots4x DIMM
Internal memory4 GB
Memory clock speed1333 MHz
Maximum internal memory16 GB
Memory layout (slots x size)2 x 2 GB
Maximum graphics card memory64 MB
Graphics cardES1000
LAN controllerIntel® 82578DM
Networking featuresGigabyte Ethernet
PS/2 ports quantity0
USB 2.0 ports quantity11
PCI Express slots version2.0
Power supply250 W
Power requirements100 - 127 V, 200 - 240 V, 47 - 63 Hz
Power consumption (typical)171 W
Noise level24 dB
Operating system installed-
Compatible operating systemsWindows Server 2008, Server 2003 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)10 - 85 %
Sustainability certificatesENERGY STAR
CertificationGS CE CSAc/us ULc/us FCC CB RoHS WEEE
Chassis typeTower
Processor ARK ID42927
Intel® Turbo Boost Technology1.0
Weight and Dimensions IconWeight and Dimensions
Depth386 mm
Width203 mm
Height390 mm
Weight12000 g

Related product manuals