38 Operating Manual T X100 S2
Installing the hardware
4.1 Unpacking the server
V CAUTION!
Follow the safety instructions in chapter "Important notes" on page 21.
The server must always be lifted or carried by at least two people.
(For the Japanese market, please refer to " 安全上の注意およびその他の
重要情報 ".)
Do not unpack the server until it is at its installation location.
Ê Transport the server to the place where you want to set it up.
Ê Unpack all individual parts.
Keep the original packaging in case you want to transport the server again
(applies only to EMEA market).
Ê Check the delivery for any damage during transport.
Ê Check whether the items delivered match the details on the delivery note.
Ê Notify your supplier immediately should you discover that the items delivered
do not correspond to the delivery note.
To Next Page
Loading...
