Fujitsu PRIMERGY TX100 S2 - Drive Reported as Defective; On-Screen Error Messages

TX100 S2 Operating Manual 61
Troubleshooting and tips
7.8 Added drive reported as defective
RAID controller is not configured for this drive
Ê Reconfigure the RAID controller for the drive using the corresponding utility.
For further information, refer to the "Embedded MegaRAID Software User’s
Guide" (on the ServerView Suite DVD 2 under Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI RAID / SCSI Controllers).
If the hard disk drive continues to be shown as defective, then replace it (see the
"PRIMERGY TX100 S2 Options Guide").
7.9 Error message on screen
The meaning of the error message is explained in the documentation for the
relevant components and programs on the ServerView Suite DVD 2.