EasyManuals Logo

Fujitsu PRIMERGY TX100 S2 User Manual

Fujitsu PRIMERGY TX100 S2
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Operating Manual T X100 S2
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance control
in weapons systems (hereafter, "high safety use"). Customers should not use
this product for high safety use unless measures are in place for ensuring the
level of safety demanded of such use. Please consult the sales staff of Fujitsu if
intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for the Japanese market:
About SATA hard disk drives
The SATA version of this server supports hard disk drives with SATA / BC-SATA
storage interfaces. Please note that the usage and operation conditions differ
depending on the type of hard disk drive used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of hard disk drive:
http://primeserver.fujitsu.com/primergy/harddisk/

Other manuals for Fujitsu PRIMERGY TX100 S2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX100 S2 and is the answer not in the manual?

Fujitsu PRIMERGY TX100 S2 Specifications

General IconGeneral
Tcase72.7 °C
Bus typeDMI
SteppingB1
FSB ParityNo
Processor codeSLBLJ
Processor cache8 MB
Processor cores4
Processor modelX3430
System bus rate2.5 GT/s
Processor seriesIntel Xeon 3400 Series
Processor socketLGA 1156 (Socket H)
Processor codenameLynnfield
Motherboard chipsetIntel® 3420
Processing Die size296 mm²
Processor frequency2.4 GHz
Processor cache typeSmart Cache
Processor lithography45 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor front side bus- MHz
Processor boost frequency2.8 GHz
Processor operating modes64-bit
ECC supported by processorYes
PCI Express configurations1x16, 2x8, 4x4
Supported instruction setsSSE4.2
Thermal Design Power (TDP)95 W
Number of processors installed1
CPU multiplier (bus/core ratio)18
Physical Address Extension (PAE)36 bit
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3-SDRAM
Number of Processing Die Transistors774 M
Memory channels supported by processorDual
Memory clock speeds supported by processor800, 1066, 1333 MHz
Memory bandwidth supported by processor (max)21 GB/s
Maximum internal memory supported by processor32 GB
HDD size3.5 \
HDD interfaceSerial ATA
Optical drive typeDVD-RW
Total storage capacity1000 GB
Maximum storage capacity4 TB
Number of HDDs installed2
Memory slots4x DIMM
Internal memory4 GB
Memory clock speed1333 MHz
Maximum internal memory16 GB
Memory layout (slots x size)2 x 2 GB
Maximum graphics card memory64 MB
Graphics cardES1000
LAN controllerIntel® 82578DM
Networking featuresGigabyte Ethernet
PS/2 ports quantity0
USB 2.0 ports quantity11
PCI Express slots version2.0
Power supply250 W
Power requirements100 - 127 V, 200 - 240 V, 47 - 63 Hz
Power consumption (typical)171 W
Noise level24 dB
Operating system installed-
Compatible operating systemsWindows Server 2008, Server 2003 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)10 - 85 %
Sustainability certificatesENERGY STAR
CertificationGS CE CSAc/us ULc/us FCC CB RoHS WEEE
Chassis typeTower
Processor ARK ID42927
Intel® Turbo Boost Technology1.0
Weight and Dimensions IconWeight and Dimensions
Depth386 mm
Width203 mm
Height390 mm
Weight12000 g

Related product manuals