TX100 S2 Operating Manual 65
Index
R
RAID controller is not configured for
this drive 61
RAID level 13
recycling devices 35
redundancy, fans 12
regulations and standards 16
return of devices 35
S
Safety instructions 21
safety standards 16
SAS controller 12
saving energy 34
screen
error message 61
flickering 59
remains blank 58
shows flickering stripes 59
SDDC (Single Device Data
Correction) 13
security function 9
Serial port COM1 40
Server
LAN indicator 48
server
configuration 14
configuring 51
connecting external devices 40
connecting mains voltage 42
connecting to the mains 42
control panel 45
correcting faults 57
data protection 55
dimensions 17
electrical data 15
indicators 45
operation 45
ports 40
power on indicator 46
property protection 55
startup 45
switches itself off (error) 58
switching off 49
switching on 49
technical data 15
troubleshooting 57
ventilation clearance 17
weight 17
Server management 13
ServerView Installation Manager 14,
52
ServerView Operations Manager 13
supported functions 13
service 14
touch points 14
s
etting up, server 39
Single Device Data Correction
(SDDC) 13
slot, expansion card 11
startup
server 45
support 14
switch off time, defining 50
switch on time, defining 50
switching off, server 49
switching on, server 47, 49
system board, features 11
system fans 12
system fans, redundant 12
T
target group 9
technical data 15
ambient conditions 17
noise level 17
time, incorrect 60
tips 57
touch points 14
transport damage 19, 38
transportation 33
troubleshooting 57
troubleshooting, server 57
U
unpacking 38
USB port 40, 45
To Next Page
Loading...
