Fujitsu PRIMERGY TX1330 M4

104 Operating Manual TX1330 M4
Technical data
Slots
Drive Bays
Dimensions / weight
Ventilation clearance
There must be a clearance of at least 200 mm in front of and behind the server
to ensure adequate ventilation of the subsystem.
Slot 1: PCIe Gen3 x1
(mechanical x4)
up to 167.65 mm length
Slot 2: PCIe Gen3 x4
(mechanical x4)
notched, up to 167.65 mm length
Slot 3, 4: PCIe Gen3 x8
(mechanical x8)
2x (up to 240 mm length)
Slot notes In SAS configuration 1x PCI-Express occupied by
modular RAID controller.
HDD bay configuration up to 12x 3.5-inch, for SAS / SATA
or 8x / 16x / 24x 2.5-inch for SAS/SSD optional
Accessible drive bays 3 x 5.25/1.6-inch for backup devices
Notes accessible drives All possible options described in relevant system
configurator.
Tower (W x D x H) 177 x 560 x 455 mm
Rack (W x D x H) 483 x 495 x 174 mm (without projecting parts)
Mounting Depth Rack 543 mm
Weight Approx. 13 - 28 kg
Weight notes Weight may vary depending on actual configuration
Rack mounting kit Rack mounting kit as option