58 Operating Manual
TX1330 M4
5.1 Installation steps, overview
Ê First of all, carefully read the safety instructions in "Important information" on
page 43 and following.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note, see "Unpacking the server" on page 60.
Ê Ensure that you have all necessary manuals, see "Documentation overview"
on page 13; print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting, see the original component documentation.
Ê Set up the floorstand model, see section "Setting up the floorstand model"
on page 61 or install the rack model in the rack, see section "Installing the
server in the rack" on page 64.
Ê Connect the devices to the server. To do this, see the sections "Notes on
connecting/disconnecting cables" on page 68 and "Connecting devices to
the server" on page 69.
Ê Connect the server to the mains, see section "Connecting the power cord"
on page 70.
Ê If applicable, get access to the drives, see section "Access to the drives
(floorstand model)" on page 82.
Ê If applicable, install the HDD/SSD modules, see "Installing HDD/SSD
modules" on page 85.
Ê If applicable, install an second PSU, see "Installing a second PSU" on
page 89.
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server, see section "Connectors, controls and indicators" on page 28.
To Next Page
Loading...
