Fujitsu PRIMERGY TX1330 M4

TX1330 M4 Operating Manual 75
Starting up
5.7.1.1 Configuring the controllers
Ê Configure the RAID controllers using the ServerView RAID Manager.
Ê If applicable, configure the onboard SATA controller, see "Notes on
configuring controllers" on page 77.
Ê If applicable, configure the SAS/SATA RAID controller with MegaRAID
functionality, see "Notes on configuring controllers" on page 77.
5.7.1.2 Installing the operating system
I For more information on installing the server, see the
"ServerView Installation Manager" user guide at
http://manuals.ts.fujitsu.com under x86 Servers - Software -
ServerView Suite - Server Installation and Deployment.
Ê Open this manual.
Ê For the remote or local installation, follow the instruction in this manual and
on the screen.
Ê Configure the settings for the general system behavior of the server using
the Server Configuration Manager.
5.8 Configuring the server without ServerView
Installation Manager
5.8.1 Configuring the server and installing the operating
system
5.8.1.1 Configuring the onboard SAS/SATA controller
Ê If applicable, configure the onboard SATA controller, see "Notes on
configuring controllers" on page 77.
Ê If applicable, configure the SAS/SATA RAID controller with MegaRAID
functionality, see "Notes on configuring controllers" on page 77.
5.8.1.2 Installing the operating system
Ê Insert the DVD for the operating system you want to install.