Fujitsu PRIMERGY TX1330 M4

40 Operating Manual TX1330 M4
Product description
3.3.3.2 Indicator on hot-plug PSU
Figure 13: Indicator on hot-plug PSU
Pos. Indicator Status Description
1
PSU status
indicator
flashing
green
The server is switched off, but mains
voltage is present (standby mode).
green on
The server is switched on and operating
properly.
flashing
orange
An overload has been detected. The
PSU is still running, but failure might be
imminent.
orange on
An PSU failure has been detected.
Possible causes:
– Over/under voltage
– Overheating
– Fan failure
0