EasyManua.ls Logo

Fujitsu PRIMERGY TX1330 M4

Fujitsu PRIMERGY TX1330 M4
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX1330 M4
Operating Manual 89
Operation
6.4 Installing a second PSU
6.4.1 Removing the dummy cover
Figure 30: Removing the dummy cover
Ê Press in on both release latches (1) and remove the PSU dummy cover (2).
V CAUTION!
Keep the dummy cover for future use. If a PSU is removed and not
immediately replaced by a new one, a dummy cover must be installed in
the bay again to comply with applicable EMC regulations and satisfy
cooling requirements.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX1330 M4

Related product manuals