EasyManuals Logo
Home>Fujitsu>Server>PRIMERGY TX1330 M4

Fujitsu PRIMERGY TX1330 M4 User Manual

Fujitsu PRIMERGY TX1330 M4
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
TX1330 M4
Operating Manual 51
Important information
If the server/rack is intended for permanent connection to the mains
only an authorized specialist (electrician) is allowed to work.
Please follow the regulation of each country.
If the server is integrated into an installation that draws power from an
industrial power supply network with an IEC309 type connector, the
power supply's fuse protection must comply with the requirements for
non-industrial power supply networks for the type A connector.
Other important information
During cleaning, observe the instructions in the corresponding Operating
Manual chapter "Starting up and operation" > "Cleaning the server".
Keep all manuals close to the server. All documentation must be included if
the equipment is passed on to a third party.
4.2 ENERGY STAR
Products that have been certified compliant with ENERGY STAR
and labelled are in full compliance with the specification at
shipping. Note that energy consumption can be affected by
software that is installed or any changes that are made to the
hardware configuration or BIOS or energy options subsequently.
In such cases, the properties guaranteed by ENERGY STAR can
no longer be assured.
The "ServerView Operations Manager" user guide contains
instructions for reading out measurement values, including those
relating to current energy consumption and air temperatures.
Either the Performance Monitor or the Task Manager can be
used to read out CPU utilization levels.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX1330 M4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX1330 M4 and is the answer not in the manual?

Fujitsu PRIMERGY TX1330 M4 Specifications

General IconGeneral
Chassis typeTower
Product colorBlack
HDD size2.5 \
RAID supportYes
HDD interfaceSerial ATA III, Serial Attached SCSI (SAS)
Optical drive typeDVD±RW
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs installed0
Number of HDDs supported8
Bus typeDMI3
Tjunction100 °C
Scalability1S
Processor cache12 MB
Processor cores6
Processor modelE-2136
System bus rate8 GT/s
Processor socketLGA 1151 (Socket H4)
Processor threads12
Processor codenameCoffee Lake
Processor frequency3.3 GHz
Processor cache typeSmart Cache
Processor lithography14 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor boost frequency4.5 GHz
Processor operating modes64-bit
Embedded options availableNo
PCI Express configurations1x16, 2x8, 1x8+2x4
Supported instruction setsAVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)80 W
Number of processors installed1
Maximum number of PCI Express lanes16
Memory types supported by processorDDR4-SDRAM
Memory channels supported by processorDual
Memory clock speeds supported by processor2666 MHz
Memory bandwidth supported by processor (max)41.6 GB/s
Maximum internal memory supported by processor128 GB
Compatible operating systemsMicrosoft Hyper-V Server 2012 R2 Microsoft Hyper-V Server 2016 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2016 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Server 2016 Essentials Microsoft Windows Server 2012 R2 Foundation Microsoft Windows Storage Server 2012 R2 Standard Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 Microsoft Windows Server 2012 Datacenter Microsoft Windows Server 2012 Standard Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 Foundation
Memory slots4
Internal memory16 GB
Maximum internal memory64 GB
LAN controllerIntel i210
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity2
Power supply450 W
Power supply input frequency50 - 60 Hz
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 85 %
CertificationCB, RoHS, WEEE, GS, CE, CSA us, ULc/us, FCC Class A, VCCI:V3 Class A + JIS 61000-3-2, GOST-R, KC, CCC, C-Tick, BSMI
PCI Express slots version3.0
On-board graphics card modelNot available
Processor ARK ID134857
Intel Secure Key Technology version1.00
Weight and Dimensions IconWeight and Dimensions
Depth560 mm
Width177 mm
Height455 mm

Related product manuals