Fujitsu PRIMERGY TX150 S8 System Configurator And Order-Information Guide

System configurator and order-information guide
PRIMERGY TX150 S8 Status 2016-02-29
Memory Configuration PRIMERGY TX150 S8
The CPU offers 6 Slots for DDR3 Memory Modules organised in 2 Banks and 3 Channels.
Depending on the amount of memory configured you can decide between 4 basic modes of operation (see explanation below).
There are 2 different kinds of DDR3 Memory Modules available: UDIMM and RDIMM
UDIMM / RDIMM offer different functionality. Mix of UDIMM / RDIMM is not alloved.
If 1.5V and 1.35V DIMMs are mixed, the DIMMs will run at 1.5V
Mode Configuration Application
SDDC (chipkill) support any no no yes detect multi-bit errors
Independant Channel 1, 2 or 3 Modules per Bank yes yes yes offers max. flexibility, upgradeability, capacity
Mode use UDIMM modules for lowest cost
Mirrored Channel Mode *) 2 identical Modules / Bank no no yes offers maximum security
Performance Mode
3 identical Modules / Bank yes yes yes offers maximum performance and capacity
Rank Sparing Mode *) min. 2 Ranks / Channel no no yes balances security and capacity
*) For the delivery ex works the system will be prepared with dedicated BIOS setting.
Capacity Configuration UDIMM RDIMM
Min. Memory 1 Module 1x2GB 1x4GB
Max. Memory
4/6 Modules 6x4GB
6x16GB
Memory-Speed:
Max. DDR3 memory speed depends on the memory configuration on one memory channel and the speed of the CPU
The memory channel with the lowest speed defines the speed of all CPU channels in the system
R
D
Voltage setting (BIOS)
1.5V [default]
DPC DPC DPC DPC DPC DPC DPC DPC DPC
CPU with 1600MHz DDR3 Bus
CPU with 1333MHz DDR3 Bus
CPU with 1066MHz DDR3 Bus
1R - Single Rank
2R - Dual Rank
1DPC = 1 DIMM per Channel
2DPC = 2 DIMM per Channel
Configuration hints:
- The memory sockets on the systemboard offer a color coding:
Bank I black sockets
Bank II blue sockets
- A so called Bank consits of 1 memory module on every Channel available on the CPU (examples see below)
Bank I
up to 3 memory modules connected to Channel A - C
Bank II up to 3 memory modules connected to Channel D - F
- See below and next page for a detailed descriptions of the memory configuration supported.
1333
1333
1066
1333
x4
1
2
3
RDIMM
RDIMM
x8
1.5V [default]
1.35V
1600
1600
-
1333
Mem. Speed provided
by CPU
UDIMM 1600MHz
UDIMM
x8
1.35V
2
1
1
2
1
2
1066
1066
1066
1066
1066
-
1066
1333
1333
1333
-
1333
1066
1066
1333
1333
Real maximum memory-bus speed depending on CPU type,
memory configuration (DPC) and voltage setting (BIOS)
1066
1066
1066
Fujitsu PRIMERGY Server 11 of 24

Fujitsu PRIMERGY TX150 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX150 S8
Category	Server
Language	English