Fujitsu PRIMERGY TX150 S8 System Configurator And Order-Information Guide

System configurator and order-information guide
PRIMERGY TX150 S8 Status 2016-02-29
B
PRIMECENTER Rack
S26361-F2735-E285 S26361-F2735-E111
RMK-F2_DI_CMA_QRL_LV
No Rackmount-Kit option S26361-F2735-L285
telescopic drop-in rail, full extr.
Only for loose deliveries
RMK-F2_DI_CMA_QRL_LV
1-hand-mounting
No mounting in racks possible for loose delivery
RMK - 1 pair consisting of
max. 1x per system
-
vario carrier length variable
S26361-F2735-L31
with quick release lever support
Adapter angle PC/DC-Rack, till 200Kg
- telescopic drop-in rails necessary for mounting RMKs in
with CMA adapter asymmetrical racks
1x per system
C
S26361-F4530-E10
Mounting of RMK in symmetrical racks
(no support brackets needed)
S26361-F2735-E71
S26361-F2735-E82
Cable Management Arm (CMA) can
Lateral cable management 2U cable management arm (CMA)
only be used for FTS RMKs with
for 2U servers or higher
for 2U server or higher
CMA adapter
- for asymmetrical racks - for symmetrical racks
PRIMECENTER S2 or M1 M1 or 3rd party racks
S26361-F2735-L82
- 1 bracket PC Rack asym.
Fujitsu racks Cable management arm for 2U Server
1x per system 1x per system
or higher for loose delivery
can only be mounted at RMK with
CMA adapter
for loose delivery
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered "Rack-mounting ex factory"
completely pre-mounted and This service is to be ordered once
all wired connections are tested. per installable server/storage
With PCR S2 12U, 24U, 38U and subsystem, in order to get the
PRC M1 16U, 24U, 42U: server/storage subsystem
Systems and components mounted into the racks.
will be delivered installed in the rack In case of the 46 U PCR S2
With PCR S2 racks 46U: this service has to be ordered,
Systems and components
to get the mounting kits and the
will be delivered separately cables installed.
To be ordered only together with
a PRIMECENTER rack
PCR S2 e.g. S26361-K826-V10x
new PCR M1 e.g. S26361-K827-Vxxx
refer PCR S2 or M1 rack configurator
max. 1x per System
PRIMERGY Classic 19" rack is not supported
For later conversion the following kits are available:
1.) Conversion kit 2 Floor -> Rack S26361-F1729-L260
Conversion PRIMERGY TX150 S8 base unit floorstand into
base unit rack. Only conversion, no mounting kit.
Mounting kit has to be ordered seperatly.
C
S26361-F4530-E12
Bracket 2U in asymmetrical racks
Fujitsu PRIMERGY Server 7 of 24

Fujitsu PRIMERGY TX150 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX150 S8
Category	Server
Language	English