EasyManua.ls Logo

Fujitsu PRIMERGY TX300 S7 - Server Specification

Fujitsu PRIMERGY TX300 S7
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX300 S7 / RX350 S7 Operating Manual 25
Functional overview
2.2 Server specification
This section explains the specifications for the server. The specifications for this
server are liable to be updated without any notice. Please be forewarned.
System Board
Processor
Memory Modules Configuration
System board type D2949
Chipset Intel C602
Processor quantity and
type
1or 2 Intel E5-2600 family processors
Memory slots 24
Memory slot type DIMM (DDR3) registered and unbuffered with
normal voltage (1.5V) and low voltage (1.35V)
Memory capacity
(min. - max.)
2 GB - 768 GB
Memory protection Memory Scrubbing; SDDC (only for registered
DIMMs); Hot-spare memory support
Memory Mirroring support; Rank sparing memory
support
Memory notes Max. 8 memory modules/CPU with UDIMM (low
voltage or standard) OR quad-rank RDIMM; max. 12
memory modules/CPU with single or dual-rank
RDIMM or single, dual-rank or quad-rank Load-
Reduced (LR) DIMM.
Memory Mirroring with identical modules in both
channel pairs of a bank (4 modules per bank), Rank
sparing or Performance Mode with the spare rank
module having identical or larger memory capacity
than all the other ranks on the same channel.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX300 S7

Related product manuals