TX300 S7 / RX350 S7 Operating Manual 69
Starting up and operation
6.2.1.4 Indicators on the drives
Optical drive activity indicator
Lights up green when the storage medium is being accessed.
Hard disk drive indicators
Figure 10: Indicators on the 3.5 inch and 2.5 inch HDD modules
1 HDD/SSD BUSY indicator (green)
– Lights up: HDD in active phase
– Does not light: HDD inactive (drive inactive)
2 HDD/SSD FAULT indicator (orange)
(in conjunction with a RAID controller)
– Does not light: no HDD error
– Lights up: HDD Faulty or Rebuild Stopped (drive defective/needs
replacing, a rebuild process was stopped or the HDD module is not
correctly inserted)
– Slow flashing: HDD Rebuild (the data is being restored after changing
a drive)
– Fast flashing: HDD Identify
– Four fast blinks/pause: HDD Predicted Fault
– Two fast flashes/pause: HDD Hot Spare (Hot spare drive active. The
corresponding drive has failed).
12 21
To Next Page
Loading...
