EasyManua.ls Logo

Fujitsu PRIMERGY TX300 S7 - Rear of Server

Fujitsu PRIMERGY TX300 S7
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX300 S7 / RX350 S7 Operating Manual 71
Starting up and operation
6.2.2 Rear of server
CSS, Global Error and ID indicator
Figure 12: Indicator on the connection panel: CSS, Global Error and ID indicator
1 CSS, Global Error and ID indicator (yellow, orange and blue)
Global Error indicator (orange)
Lights up orange if a prefailure event has been detected that
requires (precautionary) service intervention.
Flashes orange if an error was detected that requires service
intervention.
Does not light up if there is no critical event.
If the event is still acute after a power cycle, the indicator is activated
after the restart.
The indicator also lights up in standby mode.
You can find more details on the indicated errors in the System
Event Log (SEL), on the ServerView Local Service Panel, in the
ServerView Operations Manager or via the iRMC S3's Web
interface.
!

Table of Contents

Other manuals for Fujitsu PRIMERGY TX300 S7

Related product manuals