64 A26361-K881-Z102-4-7619
Switching the Server ON and OFF Preparation for Use and Operation
Switching the server OFF
The power-on indicator (position 2in figure 24 on page 55) lights green.
Ê Shut down the operating system in an orderly manner.
Ê Press the ON/OFF button (position 1in figure 24 on page 55). and/or send a
corresponding control signal (see „Other ON/OFF options„).
The server switches OFF and remains in standby mode.
Other ON/OFF options
In addition to the ON/OFF button, the server can be switched ON and OFF in
the following ways:
– Specified switch-on time/switch-off time
The server is switched ON or OFF at a time specified in the ServerView
program.
– Ring indicator
The server is switched ON via an internal or external modem.
– Wakeup On LAN (WOL)
The server is switched on by a command via the LAN (Magic Package).
– After power failure
The server automatically reboots following a power failure (depending of the
settings in the BIOS).
To Next Page
Loading...
