7.1 Replacing Consumables
ScanSnap fi-5110EOXM Operator's Guide 87
Replacing Consumables
7
HINT
Use the following procedure to check the target values for replacement and
usage information of consumables.
1. Click and hold the "ScanSnap Manager" icon on the Dock menu.
2. Click [Check consumable supplies...] on the menu.
⇒ The "Check consumable status" screen appears. This screen
indicates how many times consumables have been used.
Replace consumables using "Target value to change supplies" as guidelines.
For details about purchasing consumables, visit the website below or
contact the Fujitsu scanner dealer where you purchased your scanner.
[Website] http://scansnap.fujitsu.com/
To Next Page
Loading...
