Periphery ETERNUS LT40 S2 tape library
U41861-J-Z126-1-76 43
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k05
You call the RMU in the browser by entering the following URL in the address bar:
● http://<IP address>
● or http://<name> (if the name is configured in the DNS)
You can store a corresponding link in the SE Manager on the MU (see the “Operation and
Administration” manual [5]) and use it as an alternative for calling the RMU.
The first page you are shown is the device’s login page, which enables you to log in under
user accounts (they are named Guest and Admin or User and Administrator, depending on
the library‘s firmware version). The Service account is reserved for Customer Support. Each
of these accounts is protected by a password. You should change the passwords which are
preset when supplied (see “Changing the password of the access account” on page 44).
After you have logged in successfully, you are shown the first page under Identity > Library,
which displays the overview containing the Library Information:
The RMU supports several languages, English being the default. The functionality of the
RMU is described in detail in the manual
The functionality of the RMU is described in detail in the “ETERNUS LT40 S2 / LT60 S2”
manual. You can download the manual at the address https://support.ts.fujitsu.com :
Ê Go to Support → Computing Products → Storage → Manuals and select ETERNUS LT40 S2
in the product group ETERNUS LT.
To Next Page
Loading...
Need help?
General