ETERNUS LT40 S2 tape library Periphery
46 U41861-J-Z126-1-76
4.2.4.2 Removing and replacing a magazine using the RMU
Ê To log on, enter the correct password and press the ENTER key.
Ê Select Operations > Magazines.
In the next menu you can select the left or right magazine.
Ê Click Release.
You can now remove the magazine from the library.
4.2.4.3 Inserting tape cartridges Into a magazine
Unlock the magazines and remove them from the tape library
Ê via OCP, see section “Removing and replacing a magazine using the OCP” on
page 45.
Ê via RMU, see section “Removing and replacing a magazine using the RMU” on
page 46.
Ê Insert cartridges in the magazines.
Ê Put the magazines back to the library.
4.2.4.4 Mailslots
Mailslots are used to import/export individual cartridges without interrupting library
operation. The time-consuming inventory of all the cartridges is consequently not required
when a magazine is inserted. Always use the mailslot to import/export cartridges.
Mailslots are always activated in BS2000 operation. Consequently 3 fewer slots are
available for storing cartridges in BS2000 operation. BS2000 can use 9 slots in the left-hand
magazine and 12 slots in the right-hand one.
As soon as the mailslots are enabled, the three associated slots are no longer visible from
BS2000, i.e. the
/SHOW-TAPE-STATUS <mn>,INFO=CARTRIDGE command does not show these
slots. These three slots are consequently not available to accommodate cartridges.
To Next Page
Loading...
Need help?
General