Application Unit AU47 Application Unit
12 U41861-J-Z126-1-76
2.1.1.1 Controls
ID Identification (ID) button
Lights up (blue) on the front and on the rear of the server when the ID button
is pressed. The two ID indicators are synchronized.
On/Off switch
When the Application Unit is switched off, it is switched on again by pressing
the On/Off switch once.
When the Application Unit is in operation, it is switched off by pressing the
On/Off switch once.
V CAUTION!
Possible loss of data!
I The On/Off switch does not disconnect the server from the voltage
grid. To disconnect from the mains completely, remove the power
plugs. These buttons may only be used by Customer Support.
RST Reset button
Pressing the Reset button reboots the Application Unit.
V CAUTION!
Possible loss of data!
NMI NMI button
V CAUTION!
Do not press! Possible loss of data! The NMI button may only be used
by Customer Support.