Name: Fujitsu SE500
Brand: Fujitsu
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Application Unit Application Unit AU47

U41861-J-Z126-1-76 9

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03

2.1 Application Unit AU47

AU47s are set up on the same system unit as the PRIMERGY servers RX4770 M<x> and

use the same system board. Differences in the basic units exist to permit integration of the

Application Units into the SE server and to enhance the SE server’s redundancy features.

In the event of questions, e.g. regarding application compatibility, the information for the

PRIMERGY servers RX4770 M<x> also applies for the Application Units of the SE server.

Security functions in the BIOS setup and on the system board protect the data against

manipulation. Information on the security functions in the BIOS is provided in the "D3342

BIOS Setup Utility for FUJITSU Server PRIMERGY RX4770 M1“

(http://manuals.ts.fujitsu.com under the heading Industry standard servers).

i At present the current model of the PRIMERGY server RX4770 M1 provides the

hardware basis for AU47. When an innovation of the PRIMERGY server takes

place in future, the newer variants will be released as the hardware basis for AU47,

e.g. an RX4770 M2.

Features

Application Units contain two or four Intel XEON processors, have a storage capacity of up

to 6 TB and offer ten PCI express slots.

Detailed information on the various hardware components and interfaces of the Application

Units is provided in the data sheet "FUJITSU Server BS2000 SE Series". See the product

site for the relevant server at http://www.fujitsu.com/uk:

Ê Go to Products → Servers → BS2000 → FUJITSU Server BS2000 and select SE700,

SE500 or SE300.

Fujitsu SE500 Operating Manual

Other manuals for Fujitsu SE500