Fujitsu ServerView Event Manager - Page 50

50 ServerView Event Manager
Alarm rules
You can use the following buttons to activate or deactivate the forwarding of an
alarm:
>
Activates the selected destinations.
<
Deactivates the selected destinations.
>>
Activates all known destinations.
<<
Deactivates all known destinations.
Clicking the Apply button saves the new settings. Clicking the Reset button
restores the settings from the last save.
You can define the following responses for the alarm rule:
– Send a mail (Mail)
– Output a message (Popup)
– Log the alarm (Event Log)
– Trigger a call to a pager or mobile phone (Pager)
(This feature is not supported in the Japanese market.)
– Trigger an executable program (Execute)
– Trigger a broadcast message (Broadcast)
– Generate a trap which is forwarded to another management station (Station)
– Send a mail to a special service address (Automatic Service Mail)
(This feature is not supported in the Japanese market. For Japan another
forwarding service called FJJ Service Mail is provided.)