Fujitsu SOFTUNE - Memory Operation Functions; Functions for Memory Operations

24
CHAPTER1 Basic Functions
1.14 Memory Operation Functions
This section describes the memory operation functions.
■ Functions for Memory Operations
• Display/Modify memory data
Memory data can be display in the Memory window and modified.
•Fill
The specified memory area can be filled with the specified data.
• Copy
The data in the specified memory area can be copied to another area.
•Compare
The data in the specified source area can be compared with data in the destination area.
• Search
Data in the specified memory area can be searched.
For details, refer to "3.11 Memory Window" in "SOFTUNE Workbench Operation Manual".
• Display/Modify C/C++ variables
The names of variables in a C/C++ source file can be displayed in the Watch window and modified.
• Setting Watch point
By setting a watch point at a specific address, its data can be displayed in the Watch window.
For details, refer to "3.13 Watch Window" in "SOFTUNE Workbench Operation Manual".