Fujitsu SOFTUNE - Page 70

60
CHAPTER2 Dependence Functions
- Displaying coverage rate of load module (Specify /MODULE for the command qualifier)
- Summary (Specify /GENERAL for command qualifier.)
- Details (Specify /DETAIL for command qualifier.)
Displays the load modules and the coverage rate of each module.
>SHOW COVERAGE/MODULE
sample.abs ........................ (84.03%)
+- startup.asm .................... (90.43%)
+- sample.c ...................... (95.17%)
+- samp.c ....................... (100.00%)
Display the access status of every 16 addresses
. : No access
1 to F : Display the number accessed in 16 addresses by the hexadecimal number.
* : Access all of the 16 addresses.
>SHOW COVERAGE/GENERAL
(HEX)0X0 +1X0 +2X0
+---------------+---------------+------ ------
address 0123456789ABCDEF0123456789ABCDEF0123456 ... ABCDEF C0(%)
FF000000 **3*E*....... 32.0
Display one line of a
coverage rate
Display the access status of every 1 address
. : No access
- : Access
>SHOW COVERAGE/DETAIL FF000000
address +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F C0(%)
FF000000 - - - - - - - - - - - - - - - - 100.0
FF000010 - - - - - - - - - - - - - - - - 100.0
FF000020 . . . . - - - . . . . . . . . . 18.6
FF000030 - - - - - - - - - - - - - - - - 100.0
FF000040 - . - - - - - - - - - - - - - - 93.7
FF000050 - - - - - - - - - - - - - - - - 100.0
FF000060 . . . . . . . . . . . . . . . . 0.0
FF000070 . . . . . . . . . . . . . . . . 0.0
FF000080 . . . . . . . . . . . . . . . . 0.0