EasyManua.ls Logo

Fujitsu SP-1130Ne - Appendix and Specifications; Basic Specifications

Fujitsu SP-1130Ne
143 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
Basic Specification
Item Specification
Scanner type ADF (Automatic Document Feeder)
Image sensor Single line CMOS-CIS × 2 (front, back)
Light source RGB LED × 2 (front, back)
Scanning area (width ×
length)
Minimum size 52 × 74 (mm)/2.05 × 2.91 (in.)
Maximum size (*1) 216 × 355.6 (mm)/8.5 × 14 (in.)
Paper weight (document thickness)
50 to 209 g/m
2
(13.4 to 56 lb)
For A8 size or smaller, 127 to 209 g/m
2
(34 to 56 lb)
0.76 mm or less for plastic cards (Embossed cards
allowed, ISO7810 ID-1 type compliant)
Scanning speed (A4,
Portrait, 300 dpi) (*2)
Binary (black & white) Simplex: 30 sheets/min, Duplex: 60 pages/min
Grayscale
Color
Loading capacity (*3) 50 sheets
Paper weight: 80 g/m
2
(20 lb)
Total thickness: 5 mm or less
Optical resolution 600 dpi
Output resolution Binary (black & white) 50 to 600 dpi (configurable in 1 dpi increments)
1,200 dpi can be set from the scanner driver
Grayscale
Color
Grayscale level 8-bit for each color
For internal processing, 16-bit for each color
Interface
USB
USB 3.2 Gen 1x1 (USB 3.0)/USB 2.0/USB 1.1 (*4)
Type B
Wired LAN
IEEE802.3 Ethernet
10BASE-T/100BASE-TX/1000BASE-T
RJ-45
Network protocol (wired LAN) IPv4(*5), TCP, UDP, ICMP, DHCP
Other Hardware real-time JPEG compression
138

Table of Contents

Other manuals for Fujitsu SP-1130Ne

Related product manuals