ATTENTION
Make sure that the cloth does not get caught and damage the document sensors.
Brake roller (× 2)
Remove the brake roller from the scanner.
For details about removing the brake roller, refer to Replacing the Roller Set (page 77).
Gently wipe dirt and dust off the roller, taking care not to damage the roller surface.
Pick roller (× 6)
Gently wipe dirt and dust off the roller as you rotate the roller manually, taking care not to damage the
roller surface. Make sure that it is wiped properly because black residue on the roller will affect the
feeding performance.
Plastic idler roller (× 4)
Gently wipe dirt and dust off the roller as you rotate the roller manually, taking care not to damage the
roller surface. Make sure that it is wiped properly because black residue on the roller will affect the
feeding performance.
Glass (× 2)
Gently wipe dirt and dust off the glass sections.
Daily Care
72
To Next Page
Loading...
