ATTENTION
Vertical streaks may appear on images if the glass section is dirty.
Ultrasonic sensor (× 2)
Gently wipe dirt and dust off the surface of the ultrasonic sensors.
HINT
If it is difficult to clean, use a cotton swab.
Feed roller (× 2)/Eject roller (× 2)
The power must be turned on to rotate the feed/eject rollers for cleaning.
a Turn on the scanner.
For details, refer to How to Turn the Power ON (page 29).
b When the operator panel is in ready status, open the ADF.
For details, refer to How to Open the ADF (page 32).
Daily Care
73
To Next Page
Loading...
