Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the
Exit
menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
Ź
To save the current menu settings and exit the
BIOS Setup Utility
, select
Exit Saving Changes
and
Yes
.
The Tablet PC is reboote d
and the new settings come into effect.
Exit Discarding Changes - Reject changes and
exit BIOS Setup Utility
Ź To discard the changes, select Exit Discarding Changes and Yes.
The settings which were valid when BIOS Setup U tility was called remain effective.
The BIOS Setup Utility ends and the Tablet PC is rebooted.
Load Setup Defaul
ts – load default values
Ź To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes - Discard Changes without
exiting BIOS Setup Utility
Ź To discard the changes you have mad e, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility w as called remain effective.
You can now make additional settings in the BIOS Setup Utility.
Ź IfyouwanttoexittheBIOS Setup Utility with these s ettings, select Exit Saving Changes and Yes.
Save Chan
ges - save changes without exiting
the BIOS Setup Utility
Ź To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional settings in the BIOS Setup Utility.
Ź If yo u want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save changes and power off
Ź To save the changes and switch off your device, select Save Changes and Power Off and Yes.
The c hanges are saved. Your device is shut down.
74 Fujitsu