What to do if my Fujitsu Tablet PC stops working?
If your Fujitsu Tablet PC stops working, it might be in energy saving mode. Try ending the energy saving mode. It could also be due to an application program causing the malfunction. In this case, close the application program or restart the Tablet PC. Another possibility is that the battery is dead. To solve this, charge the battery or connect the AC adapter to the Tablet PC.
What to do if the touchscreen of my Fujitsu stylistic R726 PC remains dark?
If the touchscreen remains dark, it might be switched off. Press a key on an external keyboard or tap the touchscreen to turn it on. Alternatively, an external monitor or television set might be connected. Check whether the graphics driver settings are correct or whether an external monitor has been detected in 'Intel Graphics Media Accelerator Driver for mobile'.
What to do if the printer does not print from my Fujitsu Tablet?
If the printer doesn't print, ensure it is switched on and ready for operation. Check that the data cable between the Tablet PC and the printer is properly connected. Also, verify that the correct printer driver is loaded.
How to fix a blank or unstable image on an external monitor connected to my Fujitsu stylistic R726 Tablet?
If the image on an external monitor is blank or unstable, the wrong monitor might be selected, or the screen resolution is incorrectly set for the application. Shut down the application in Windows. If the error persists, switch to the Tablet PC's touchscreen using the key combination for switching the screen output. Set the screen resolution as described in your operating system's documentation and select monitor 1 or 2 as described in the documentation for your operating system.
What to do if the external monitor remains blank when connected to my Fujitsu Tablet?
If the external monitor remains blank, first, ensure the monitor is switched on. If it is, power saving may have been activated, so press a key on the external keyboard or tap the touchscreen. Also, check if the brightness is set too low and adjust it accordingly. The screen output might be set to the Tablet PC touchscreen, so verify the graphics driver settings or whether the external monitor has been detected in 'Intel Graphics Media Accelerator Driver for mobile'. Finally, ensure the AC cable and data cable are properly connected by switching off the Tablet PC and monitor, checking the cable connections, and then switching them back on.
What to do if my Fujitsu stylistic R726 Tablet PC does not start after I switch it on?
If your Fujitsu Tablet PC doesn't start, it could be due to a dead battery. To resolve this, charge the battery or connect the AC adapter to the Tablet PC. Alternatively, the AC adapter might not be properly connected. Ensure it is correctly connected to the Tablet PC and then switch the Tablet PC on.
What to do if the battery charging indicator is not lit on my Fujitsu stylistic R726?
If the battery charging indicator is not lit, it means the battery is not being charged. Connect the Tablet PC to a power outlet using the AC adapter. Note that the battery will only be charged again when the battery capacity is less than 90%.
What to do if stylus input is not working on my Fujitsu stylistic R726?
If stylus input isn't working on your Fujitsu Tablet, it could be due to an incorrect driver installation. If your device only operates with a stylus, install the driver for the standard model. If it operates by stylus and finger, install the 'Dual Digitizer' model driver. The stylus may also be in sleep mode; press the upper stylus button to wake it. Finally, the stylus battery might be completely discharged; change it as described in chapters 'Removing the stylus battery', Page 34 and 'Installing the stylus battery', Page 34.
Why is the battery of my Fujitsu stylistic R726 discharging too quickly?
If the battery of your Fujitsu Tablet discharges too quickly, it could be due to several reasons. The battery might be too hot or too cold; in this case, the battery indicator flashes, so bring the Tablet PC to a normal operating temperature. If the operating time is extremely short, the battery is likely old and needs replacement. Also, an application running might be consuming excessive power due to frequent hard disk or optical drive access - use the AC adapter whenever possible. Finally, the screen brightness may be set to maximum; reduce it via Control Panel – Hardware and Sounds – Windows Mobility Center to lower energy consumption.
General| Operating System | Windows 10 Pro |
|---|---|
| Bluetooth | Bluetooth 4.1 |
| Display | 1920 x 1080 pixel |
| RAM | 4 GB |
| Storage | 128GB SSD |
| Wireless | 802.11a/b/g/n/ac |
| Ports | USB 3.0, HDMI |
| Card Reader | microSDXC |
| Camera | Front: 2 MP, Rear: 5 MP |
| Security | Fingerprint sensor |
Provides essential safety information and references other manuals.
Step-by-step guide to connecting the AC adapter for power.
Instructions for turning the device on for the initial setup.
Steps for turning the Tablet PC on and its power indicator.
Guide to using the stylus for navigation, input, and drawing.
Step-by-step instructions for connecting the Tablet PC to the docking cradle.
Steps for connecting the Tablet PC to the magnetic keyboard.
Steps to configure supervisor and user passwords in the BIOS Setup Utility.
How to set up a password prompt before the operating system starts.
Information on enabling and disabling the TPM security module.
Information on connecting various USB devices, including speeds.
Step-by-step instructions to access the BIOS Setup Utility.
How to navigate, select options, and make changes within the BIOS Utility.
Options for saving changes, discarding changes, or loading defaults before exiting.
Initial steps to take when a fault occurs, including contacting support.
Methods for resetting the device, including forced shutdown.
Guide to creating a recovery drive for troubleshooting and system recovery.
Options for resetting the PC, keeping files or removing everything.
Steps to reinstall Windows using external installation media.
To Next Page