What to do if SmartCard lost on my Fujitsu STYLISTIC V727 Tablet?
If you work in a network and have lost your SmartCard for your Fujitsu Tablet, contact your system administrator, who can boot your Tablet PC with a Supervisor SmartCard.
What to do if I forgot my SmartCard PIN on my Fujitsu STYLISTIC V727?
If you work in a network and have forgotten your SmartCard PIN for your Fujitsu Tablet, contact your system administrator, who can unlock your Tablet PC with a supervisor PIN.
What to do if my Fujitsu STYLISTIC V727 PC does not start after switch on?
If your Fujitsu Tablet PC does not start after being switched on, check if the battery is correctly installed in its compartment. If the battery is dead, charge it, insert a charged battery, or connect the mains adapter to the Tablet PC. Also, make sure the power adapter is correctly connected to the Tablet PC.
Why doesn't the wireless connection to a network work on my Fujitsu STYLISTIC V727?
If the wireless connection to a network does not work on your Fujitsu Tablet, ensure the wireless component is enabled (see "Switching the wireless components on and off", Page 37). If it is enabled but the connection still fails, check whether the wireless connection is switched on via the software. Further information on using the wireless component can be found in the help files.
What to do if the printer does not print from my Fujitsu STYLISTIC V727 Tablet?
If the printer does not print from your Fujitsu Tablet, ensure the printer is switched on and ready for operation, referring to its documentation. Check that the data cable connecting the Tablet PC to the printer is properly connected. Also, verify that the correct printer driver is loaded, referring to the printer documentation.
What to do if the touchscreen remains dark on my Fujitsu STYLISTIC V727 PC?
If the Fujitsu Tablet PC’s touchscreen remains dark, press a key on an external keyboard or tap the touchscreen. If you have an external monitor or television set connected, check the graphics driver settings or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile".
Why does the battery discharge too quickly on my Fujitsu Tablet?
If the battery discharges too quickly on your Fujitsu Tablet, it may be too hot or too cold; bring it to a normal temperature. If the operating time is extremely short, the battery is likely old and needs replacement. Using applications that frequently access the hard disk or optical drive can also drain the battery; use the mains adapter as frequently as possible. Reducing the screen brightness can also lower energy consumption; adjust this setting under Control Panel – Hardware and Sounds – Windows Mobility Center.
How to fix cursor not following pen on Fujitsu STYLISTIC V727 Tablet?
If the cursor does not correctly follow the pen movements on your Fujitsu Tablet, the pen may be incorrectly calibrated. Calibrate the pen as described in chapters "Setting the pen", Page 27 and "Calibrating the pen", Page 27.
How to improve display readability on Fujitsu STYLISTIC V727 Tablet?
If the display on your Fujitsu Tablet is difficult to read, try moving the Tablet PC to a different position to avoid reflected glare. Additionally, increase the brightness of the screen.
What to do if the external monitor remains blank when connected to my Fujitsu STYLISTIC V727?
If the external monitor remains blank, first ensure it is switched on. If it is on, power saving mode may be activated; press a key on the external keyboard or tap the Tablet PC's touchscreen. Also, adjust the monitor's brightness if it's set too low. Check the graphics driver settings to ensure the screen output is correctly configured and that the external monitor is detected. Finally, power off both the Tablet PC and the external monitor, verify the power and data cables are properly connected, and then power them back on.
Details on where to find additional product information and software.
Explanation of symbols and text formatting used in the manual.
Essential safety precautions for device operation and handling.
Guidelines for safe travel, transportation, and use in different countries.
Instructions on how to clean the tablet PC safely and effectively.
Steps for unpacking the device and checking for any shipping damage.
Guidance on choosing a safe location and connecting the power adapter.
Instructions for turning on the device for the very first time.
Explanation of the LED indicators for power, battery, and wireless status.
Using the touchscreen, handwriting recognition, finger input, and stylus pen.
Procedures for charging, maintaining, storing the battery, and power-saving features.
Instructions for inserting and removing memory and SIM cards.
Connecting and disconnecting the tablet PC to and from its optional cradle.
Connecting and disconnecting the tablet PC to and from the magnetic keyboard.
Instructions for inserting the tablet PC into the flip-cover stand.
Guide to installing and using the fingerprint sensor for security.
Configuring supervisor and user passwords for BIOS and system boot.
Setting up hard disk passwords and enabling/disabling the Trusted Platform Module.
Information on using the Smart Card reader and inserting a Smart Card.
Connecting displays via Display Port and VGA monitor ports.
Connecting USB devices, including USB Type-C with charging function.
Connecting headphones, microphones, and headsets to the combo port.
How to enter and navigate the BIOS Setup Utility menus.
Saving changes, discarding changes, and loading default settings.
Steps to take when encountering faults and information to provide support.
Resolving issues with the touchscreen, external monitor, and pen input.
Addressing problems with startup, application errors, printing, and wireless connections.
Understanding error messages and restoring the system to its original state.
Specifications for processor, memory, display, cameras, dimensions, and ports.
Supported screen resolutions for integrated and external displays.
Technical details for the rechargeable battery and mains adapters.
Information on proper disposal and recycling of the device.
Details on electrical safety, ergonomic requirements, and SAR limit value.
To Next Page
General