Fulton Heating Solutions, Inc. -- PHW Manual -- 2010-0713
Page 74
Note
If for any reason, the air intake or exhaust vent piping is disassembled, reassemble
the piping in accordance with the installation procedure outlined in the installation
section of this manual.
Note
Should you suspect that the boilers flue passage ways have become blocked,
contact your recognized Fulton representative.
Note
On models PHW300 through PHW1400 the spark plug is located in the top of the
boiler. In PHW2000 the spark plug is located in the gas injector behind the air
flapper, and requires a spark plug removal tool.
Note
Pulse hydronic loops should be configured so that each boiler does not cycle
more than 12,000 times per year. Warranty may be void if excessive cycling is
apparent.
To Next Page
Loading...
