EVO EXPERT Manual 34/105
If you choose the option ‘TTT and TTS’, the following screen appears:
The two fields to activate in this screen are the TTT and TTS. To select a field, use the ‘’ or ‘’
keys to go through the options cyclically. The field that is selected at each moment will change the
colour of the text.
TTT and TTS can only be ON or OFF. To change from one to the other you must have the field
selected and use the ‘ENTER’ key to change modes.
If neither mode is chosen, you cannot access the ‘Torque’ or ‘Time’ fields. These fields need to be
activated (‘ON’ in the fields TTT and TTS, respectively) in order to access them.
Once the ‘Time to Torque’ field is activated, the ‘TORQUE’ field appears highlighted. Press ‘ENTER’
again to activate the screen that allows the edition of this parameter. This screen is like the
following:
The active field can be changed by pressing the ‘►' key. Once highlighted the appropriate field, it
can be selected by pressing the ‘ENTER’ key. The selected field changes its background colour to
light blue, which means that the field can be edited. Using the numerical keys you should enter the
desired value and press ‘ENTER’ again with the ‘SAVE’ option highlighted to save the changes. This
value will remain saved even if the option is deactivated (‘OFF’).
‘Time’ is modified in a similar way. You should have the ‘TTS’ option activated (hitting the ‘ENTER’
key to change the mode to ‘ON’). Once it is selected, hit ‘ENTER’ and the following screen will be
shown:
To Next Page
Loading...
