Funkwerk EGO TALK User Manual

28
|
29
Problem Ursache Abhilfe
EGO TALK doesn‘t
turn on
Power supply disabled If necessary, replace fuse and check all leads and connections
Ignition not on Turn ignition on
Ignitions circuit disabled Check cable and 1 A fuse
The party you are calling cannot hear you Microphone not plugged in
Connect microphone to electronics box,
defective cables require replacement
The party you are calling complains about
interference
Microphone in air stream Mount microphone elsewhere or reduce ventilation
Phone too close to EGO TALK
components or car radio
Increase the distance between your phone and
the EGO Talk or radio
The party you are calling hears an echo
Distance between microphone and
speakers too small
Increase distance or lower volume
Volume too high Lower volume
Your phone cannot fi nd
EGO TALK during coupling
EGO TALK already connected to another device Disconnect existing connection
Sound is unclear, distorted Poor Bluetooth
®
connection
Reduce the distance between your phone and the EGO TALK or
remove any (metallic) obstructions
No connection to coupled
phone when ignition turned on
Phone is out of range. Make sure your phone is within the range of the EGO TALK.
Phone Bluetooth
®
interface is deactivated.
Switch phone Bluetooth
®
function to ”ON“
(Option ”Automatic“ is not suffi cient)
Phone requires confi rmation
of connection set-up.
Confi rm connection on your phone. Deactivate security function
(see your phone manual)
One of the two devices no longer has
a valid connection code.
Repeat the coupling procedure.
Troubleshooting:

Funkwerk EGO TALK Specifications

General

Brand	Funkwerk
Model	EGO TALK
Category	Automobile Accessories
Language	English