Installation guide
6.1 Determination of required confi guration
Before installation of your EGO TALK, please note which features and connection options are provided by your car audio
system. It is advantageous when your audio has the following: a muting function, phone input and line-in. You can fi nd out
which of these input options your audio system has in the documentation provided.
6.1.1 Vehicle
The hands-free system may only be installed in vehicles with a negative grounded, 12 V electrical system. If no car audio is
installed, an add-on speaker will be required. For the installation of the optional charging cradle, you will require a model-
specifi c mounting that may be purchased from a specialist dealer
6.1.2 Telephone
A Bluetooth
®
-compatible telephone must be available for use with this system. You can fi nd a list of supported Bluetooth
®
telephones online at www.fwd-online.de.
6.1.3 Muting (radio muting)
The muting function (Radio Muting) ensures that the audio sound is turned off during telephone calls. The system
supports the muting function. Your car`s audio documentation will show whether your car audio has a mute option. If your
car audio is not equipped with a muting option, you can install the optionally available Stereo Mute Box to facilitate speaker
muting.
6.1.4 Upgrading existing Funkwerk hands-free installations to EGO TALK
The adapter cable is the ideal and simple solution for customers who already own a Funkwerk hands-free system (e.g.
Audio 2000, 3000, Audio blue, Audio com, Audio compact) and would like to upgrade to EGO TALK. The adapter cable
connects the ISO cable of your existing Funkwerk hands-free system to the EGO TALK.
NOTE! This simple upgrade is only possible for installations without a Stereo Mute Box. When installing your EGO TALK with
a Stereo Mute Box, the ISO cable from the Stereo Mute Box is to be used for the connection to the car’s electrical system.
6
8
|
9
q
To Next Page
Loading...
Need help?
General
