3. PLOTTER OPERATION
3-25
3.7 Marks, Lines
Marks are useful for denoting important points such as a good fishing spot.
Marks can be inscribed in seven shapes and seven colors (MODEL1722C
series): Red, yellow, green, light-blue, purple, blue and white.
¡
✕
Mark shapes
3.7.1 Entering a mark
1. Place the cursor on the location where you want a mark to appear.
2. Press the MARK ENTRY soft key. (Press the [HIDE/SHOW] key if the plotter
soft keys are not shown.)
The mark is inscribed in the size and shape selected on the MARKS & LINES
menu. The default mark attributes are size, normal; color (MODEL1722C series),
yellow, and shape, hollow circle (
○
).
3.7.2 Changing mark attributes
You can select the shape and for marks on the MARKS & LINES menu.
1. Press the [MENU] key to show the menu.
2. Press the CHART SETUP, TRACKS & MARKS CONTROL and MARK
SETUP soft keys to show the MARKS & LINES menu.
MARKS/LINES COLOR
YELLOW
MARKS SHAPE
¡
LINES STYLE
MARKS SIZE
LARGE
MARKS &
LINES
MARKS SHAPE
¡
LINES STYLE
MARKS SIZE
LARGE
MODEL1722C series MODEL1722 series
MARKS &
LINES
RETURN
EDIT
RETURN
EDIT
SHIP’S TRACK STATUS
TRACKING
TRACK: 1234/2000
MARK : 9/6000
SHIP’S TRACK STATUS
TRACKING
TRACK: 1234/2000
MARK : 9/6000
.
.
Marks & lines menu
3. For the MODEL1722C series, do the following to select mark and line color.
Select MARKS/LINES COLOR and press the EDIT soft key.
Use the cursor pad to choose color desired and press the ENTER soft key.
To Next Page
Loading...
