7. MAINTENANCE, TROUBLESHOOTING
7-3
7.4 Simple Troubleshooting
This section provides simple troubleshooting procedures which the user can
follow to restore normal operation. If you cannot restore normal operation do not
attempt to check inside the unit. Any trouble should be referred to a qualified
technician.
7.4.1 General
General troubleshooting
If… Then…
you cannot turn on the
power
! check for blown fuse.
! check that the power connector is firmly fastened.
! check for corrosion on the power cable connector.
! check for damaged power cable.
! check battery for proper voltage output (10.8 to 31.2 V).
there is no response when
a key is pressed
! turn off and on the power. If there still is no response the key may be faulty.
Request service.
To Next Page
Loading...
