What to do if Furuno Marine Equipment displays BYPASS/CLUTCH IS OVERLOADED?
If the Furuno Marine Equipment displays BYPASS/CLUTCH IS OVERLOADED, it means that a current of more than 5 A was detected on the bypass/clutch circuit. Check the bypass/clutch circuit to resolve this issue.
What to do if Furuno Marine Equipment displays DRIVE UNIT ERROR. PLEASE TURN OFF AND CHECK DRIVE CIRCUIT?
If the Furuno Marine Equipment displays DRIVE UNIT ERROR. PLEASE TURN OFF AND CHECK DRIVE CIRCUIT, it means that current of more than 50 A was detected on the drive circuit without rudder command. Check the drive circuit.
What to do if Furuno 520 Marine Equipment displays RUDDER ANGLE ERROR?
If the Furuno Marine Equipment displays RUDDER ANGLE ERROR, it indicates that the rudder angle sent from the rudder reference unit exceeded 55°. Check the rudder reference unit, rudder angle and its connection.
What to do if Furuno 520 Marine Equipment displays DEGRADATION OF NAV DATA QUALITY?
If the Furuno Marine Equipment displays DEGRADATION OF NAV DATA QUALITY, it means the navigation data was incomplete. Check the navigator settings.
Essential safety warnings regarding electrical hazards, operational limits, and emergency procedures.
Describes the buttons and controls on the Navpilot-511 and Navpilot-520 units.
Step-by-step guide for turning the autopilot system on and off.
Explains the manual steering mode, used for docking or leaving port.
How to engage and use the AUTO mode for maintaining a set course.
Details the ADVANCED AUTO mode for course compensation against wind and tide.
Setup and operation of the NAV mode for guiding the boat to a destination waypoint.
Describes various turning maneuvers like 180°, 360°, ORBIT, SPIRAL, and FIGURE EIGHT.
Guides on connecting and using different types of remote controllers for autopilot operation.
Explains the DODGE mode for quick manual helm control to avoid obstructions.
Details how to configure various operational parameters affecting autopilot performance.
Introduces the alarm setup menu and how to configure various audio and visual alarms.
Outlines regular maintenance tasks for optimal unit performance and longevity.
Guides on accessing and performing diagnostic tests on various system components.
Lists potential error messages, their meanings, and recommended remedies.
General| Brand | Furuno |
|---|---|
| Model | 520 |
| Category | Marine Equipment |
| Language | English |
To Next Page
