8-1
8. MAINTENANCE,
TROUBLESHOOTING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
WARNING
8.1 General Maintenance
This equipment is designed and constructed to provide many years of
trouble-free performance when properly maintained. However, no machine can
perform to the utmost of its ability without proper maintenance. Check the
following points monthly.
•
Check all cables. If damaged, replace.
•
Check connectors at rear of each unit. Tighten or clean as necessary.
•
Check earth of each unit. Tighten or clean as necessary.
•
Check voltage of ship’s mains to be sure it is within the equipment’s power
rating.
8.2 Cleaning the Equipment
Dust or dirt can be removed from the equipment with a soft, dry cloth. Do not use
chemical cleaners to clean the equipment – they can remove paint and markings
or deform the equipment.
To Next Page
Loading...
Need help?
General
