Furuno FE-800 - Alert Menu and Notifications

2. SYSTEM MENU
25
2.7 Alert Menu
2.7.1 Active alert list
The [Active Alert] list shows the currently active alerts. The list can be shown through key or menu
operation.
Key operation
Long-push the ALARM ACK key to display the active alert list.
Menu operation
Follow the procedure below to access the [Active Alert] list. Note that the [Alert] log can also be
shown through menu operation.
1. Press the MENU/ESC key to open the Main menu.
2. Select [System] using  or , then press the ENT key.
3. Select [Alert] using  or , then press the ENT key.
4. Select [Active Alert] list using  or , then press the ENT key.
5. To change pages, use  or .
6. Press the DISP key to close the open menus.
Total number of active alerts
Page No.
Log ently
Depth