Furuno FE-800 - SPECIFICATIONS OF NAVIGATIONAL ECHO SOUNDER FE-800; Transceiver Unit Specifications; Display Unit Specifications; Interface Specifications

FURUNO FE-800
SP - 1 E2384S01P
220401
SPECIFICATIONS OF NAVIGATIONAL ECHO SOUNDER
FE-800
1 TRANSCEIVER UNIT
1.1 Transmit frequency 50 kHz, 200 kHz or alternating transmit among these frequencies
1.2 Output power 1 kWrms
1.3 Minimum range 2 m (50 kHz), 1 m (200 kHz)
1.4 Accuracy ±0.5 m on the shallow range scale, respectively ±5 m on the deep
range scale, or ±2.5% of the indicated depth, whichever is the greater
1.5 Basic display range
Unit
Range
1 2 3 4 5 6 7 8
Meter 5 10 20 40 100 200 400 800
Feet 15 30 60 120 300 600 1500 2500
1.6 Roll/pitch tolerance Rolling: ±10°, Pitching: ±5°
1.7 Data recording period 24 hours at 5 second intervals, 1 hour at 1 second intervals
1.8 Recording data display 24 hours at 2 minute intervals,
12 hours at 1 minute intervals,
1 hour at 5 second intervals
1.9 Display mode “NAV”: Basic echo presentation with the depth below transducer,
keel or sea surface
“HISTORY”: Historical presentation with the depth
“OS data”: Echo presentation with the pop-up table of present
navigational data; L/L, course, speed, time, depth
Dual-frequency display
1.10 Auto-mode Range, Gain
1.11 Picture advance speed 15 minutes (200 m range) or more
1.12 Alarm Shallow depth
2 DISPLAY UNIT
2.1 Display 8.4-inch color LCD, 640x480 (VGA) , 0.267 mm/dot
2.2 Picture color Echo: 8 colors, Character and ground: 3 colors
2.3 Interface RS-232C: 1 port (for printer)
2.4 Visible distance
Depth 3.8 m
Others 0.9 m nominal
3 INTERFACE
3.1 Number of ports
Serial Input: 2, Output: 4 (IEC61162-1)
LAN I/O: 1 (Ethernet 100base-TX, RJ45 connector), IEC61162-450,
IEEE802.3 data link, IGMPv2 acceptable
Contact closure 1 (Power-fail)
KP output 1