Furuno FELCOM 250 Installation Manual

3. SETTING AFTER INSTALLATION
34
3.2 GPS Setting
1. Click GPS on the Basic settings sub menu.
2. If an external GPS is connected to the NMEA port on the communication unit, set the baud
rate to 4800 bps or 38400 bps according to the GPS connected.
3. Click the Apply button.
4. To monitor output sentences from the GPS, select a GPS among Internal GPS, NMEA port,
and None. "None" displays no sentences.
GPS

Furuno FELCOM 250 Specifications

General

Brand	Furuno
Model	FELCOM 250
Category	Marine GPS System
Language	English